Fuso Canter truck weighs in well for Constant Group 08 November 2012

The Constant Group has bought its first Fuso Canter 7.5-tonne truck, which it says is already maximising payload and improving operational efficiency.

The Canter 7C15 curtainsider – which arrived via Manchester Mercedes-Benz dealer Enza – can carry more than four tonnes, at least half a tonne more than could be achieved by the average 7.5-tonner.

"We'd been running 3.5-tonne vans but were looking for a truck that could carry more," explains Constant Group chairman Richard Garlick.

"The Canter chassis is very light so we knew it would be a strong contender. And when Enza sales executive James Dutton loaned us his demonstrator we could see that it was also solid and well-built, with a proper ladder-frame construction."

Constant worked with Truck Craft Bodies, of Stalybridge, on the design of the body.

"Thanks to the Canter's structural integrity, [Truck Craft was] able to construct a very light curtainsided body with alloy cross-members, a lower roof height and a roller shutter, instead of barn doors at the rear," says Garlick.

"When mounted to the chassis, this produced a vehicle with a kerb weight of only 3,200kg.

"And that gives us a cargo-carrying ability of 4,300kg, minus the driver and fuel, which is far ahead of anything we could achieve with a typical 7.5-tonne truck."

The truck is powered by a 3-litre diesel engine which drives through Fuso's Duonic dual-clutch, automated gearbox.

"Fully loaded, we're achieving a very impressive 21-23mpg," says Garlick.

As the new truck represents Constant's first foray into the 7.5-tonne sector, it also marks the first time the company has had to deal with the Operator's Licence system.

"Enza provided us with a great deal of very welcome support and assistance, helping us to fill out all the forms and making the whole process very painless," recalls Garlick.

Author
John Challen

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.