IRTE

DSVA recalls

Fiat Punto van

The hand brake lever may not have been manufactured to the correct specification. It could result in the vehicle rolling away. Recall all affected vehicles and replace the hand brake assembly with a...

Recalls
DSVA recalls

Iveco Daily Van

Vehicle may become unstable: it is possible that, under certain conditions, the Momentum Stability Regulator (MSR) may not engage, if the vehicle is driven harshly. This could have an adverse affect...

Recalls
DSVA recalls

Isuzu Truck N Series

Brake pipe may leak: It has been found that a manufacturing flaw in one of the extension brake pipes on vehicles extended by Wheel Base Engineering, as part of a contract for Isuzu, has caused a brake...

Recalls
DSVA recalls

Isuzu Truck F120.240

Fire may occur: It is possible that over time the underbody insulator can sag down and come into contact with the EGR cooler. This can result in the insulator igniting and a vehicle fire could then...

Recalls
DSVA recalls

Mercedes-Benz ECONIC 957

The cab tilt cylinder is connected to the frame of the cab by a pin. This pin is secured by a hexagon head bolt. The screw/bolt on some vehicles may not be tightened to the prescribed torque. As a...

Recalls
DSVA recalls

Volvo Bus B11R, B13R, B5LH, B7R, B9R, B9TL

Handbrake may not apply correctly. Due to an inadequate hardening process, it is possible that the pawl plate in the top of the handbrake valve can be subjected to premature wear. This can, in...

Recalls
DSVA recalls

Iveco Daily

Loss of control possible. Possible fitting of a non-conforming fixing screw on the front axle of vehicles with Mecbal suspension systems. If the non-conforming screws are fitted, in the worst case, it...

Recalls
DSVA recalls

Scania Truck P, G & R Series

It is possible that some brake hoses may have been manufactured without crimping the clamping sleeve. This could result in the detachment of a hose from its connection, which could result in braking...

Recalls
DSVA recalls

Isuzu Truck F110.210

Possibility of loss of control. It has been found that tie rod interfered against I-beam on full-steering lock. If the vehicles are continuously used, in the worst case, there is a possibility that...

Recalls
DSVA recalls

Volvo FH

It is possible that the steering drag link end ball joint nut may not have been torqued to the correct specification. This can lead to a loosening of the nut and in extreme cases, detachment of the...

Recalls
DSVA recalls

Volvo Bus B5 LH

Hydraulic oil may leak from the high pressure pipe to flange joint fixed to the hydraulic fan. This could cause oil to be left on the carriageway or in the worst case fire. Note: The affected vehicles...

Recalls
DSVA recalls

Michelin 275/70 R 22.5 XZU+ & 275/70 R 22.5 X InCity XZU3

Under certain operating conditions, it is possible that these tyres may suffer side wall over flexing damage, which will result in side wall cracks. This can occur before the tyre reaches it end of...

Recalls