The EGR oil hose geometry is out of specification. Garages are instructed to replace the EGR oil hose between the EGR valve and the oil filter housing. Number affected: 39. Manufacturer reference: FH...
RecallsThere is possibly a defective self-adjuster function in the brake caliper housing. Garages are asked to inspect the brake housings and replace them if found faulty. Number affected: 37. Manufacturer...
RecallsThe self-adjusting function in the brake caliper housing may be non-functional. Garages are asked to inspect the brake housings and replace them if found faulty. Number affected: 262. No manufacturer...
RecallsThe automatic brake adjuster may fail, allowing the brake adjustment to wind off. Garages are instructed to replace the automatic brake adjuster housing on the calliper of each affected wheel. Number...
RecallsA number of vehicles fitted with a 1.0, 1.5 or 1.6 Ecoboost engine and six-speed manual transmission could suffer clutch pressure plate fracture. This results in clutch smell, reduced vehicle speed...
RecallsAn incorrect operating lever might have been installed to the door locks on the right side of the vehicle. For Sprinter 907 & 910: number affected: 437. Manufacturer reference: SRV1819. Vehicle IDs:...
RecallsThe front end flap air deflector outer section does not match current series production specifications; as a result the front air deflector may become detached. Number affected: 4,777. Manufacturer...
RecallsThe steering link rod joint clamp may be insecure, because the link rod retainer joint torque tightening process was not sufficiently secured. Garages are told to check the torque on the link rod and...
RecallsThe bolted connection between the steering shaft and steering gear may have been fitted with a bolt of the wrong length. Number affected: 7. Manufacturer reference: SRV1817. Vehicle IDs:...
RecallsThe battery surge protector could fail and cause a risk of fire. As a result, they are to be removed from the system. Number affected: 2,575. Manufacturer reference: 30130. Vehicle IDs as follows:...
RecallsThe contact surface for the transverse link connection on the bearing pedestal does not conform to design, according to the OEM. There are missing cut-outs on the edges of the mounting surface for the...
RecallsThe roof cover for hybrid storage batteries could become detached; new, revised mounting brackets and fixings are to be fitted. Number affected: 1. Manufacturer reference: TI65.00M19027A. Vehicle ID:...
Recalls