Possible thermal escalation in cab heater due to relay failure. Remedy: replacement of the power relays for cooling heater. Number affected: 1. Manufacturer reference: C0178. Vehicle ID:...
Recalls
In June, Jason Moore took the newly-created UK operations manager role at MAN Truck & Bus corporate head office in Swindon, where he now helps looking after the brand’s 24 wholly-owned branches. The...
ApprenticeshipsThere is a risk of an unwanted engine acceleration or an engine failure due to a hydraulic lock caused by oil from the turbo charger bearings passing over to the compressor side of the turbo. Remedy:...
RecallsOn some vehicles with a rear-view camera the tailgate may be unlocked independently/automatically. Remedy: seal the duct for the electrical wiring harness of reversing camera on the affected...
RecallsThe rear spring centraliser might be welded incorrectly. Remedy: add three weld spots to the rear spring centralisers. Number affected: 53. Manufacturer reference: E212104022 (21-C-123). Vehicle IDs:...
RecallsThe current software does not provide sufficient NOx monitoring. Remedy: update EMS software. Number affected: 495, 88 and 7, respectively. Manufacturer reference: M9914, M9921 and M9922,...
RecallsThe middle fastening of the roof rail could come loose. Remedy: carry out a check of the roof rail and replace if necessary. Number affected: 4. Manufacturer reference: SRX2103. Vehicle IDs:...
RecallsThe bolt connection of the steering propshaft to the steering gear may not be tightened correctly in production or the hex socket fit bolt may be missing. Remedy: if the hex socket fit bolt is...
RecallsThe current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met. Remedy: update EMS software. Number affected: 382. Manufacturer...
RecallsThe lock washer of the pin joining the brake pedal to the bearing pedestal could come loose. Remedy: provide additional securement of the bearing pedestal to the brake pedal by means of fitting an...
RecallsA friction weld seam has been over torqued at the manufacturer of the steering propshaft and incorrect guide rings installed. Remedy: Replace the steering propshaft and guide rings. Number affected:...
RecallsError in emission control readings. Remedy: update Engine management system software. Number affected: 3,667. Manufacturer reference: M0151. Vehicle IDs. D range: VF610A360GD005074 to...
Recalls